Morbi accumsan ipsum velit. Nam nec tellus a odio tincidunt auctor a ornare odio. Sed non mauris vitae erat consequat auctor eu in elit.
Hollow fiber ultrafiltration(UF) membrane is one of the most natured and advanced ultrafiltration technologies. The nominal poresize is 0.001~0.1 μm. The micropores distribute around the wall of the membrane. The entrapping molecular weight scale is about several thousand to ten thousand. The water flow from the outside of the membrane to the inside, it is outer pressure type. In adverse, it is inside pressure type. The ultrafiltration is a dynamic process, and the entrapping matter can be drained out following the concentration water.
Hllow fiber UF membrane filter to clarify,conentrate and purity the streams with filtration challenges involve suspended solids, bacteria, or high concentrations of macromolecules. These high-tech membranes are widely used in variety of water treatment and waste water recycling applications.
1. Removal of all suspendied solid, algae, bacterial, virus to ensure your healthy.
2. Decrease of the dosage disinfectant(chlorine)
3. Stable and excellent water quality, turbidity less than 0.1NTU
4. Low pressure, Large flow(up to 80-100L/m2), energy saving.
5. Modular construction, small space required.
6. Hydrophilic modified to increase antipollutant, enhence chemical resistance
SPECIFICATON UF4040 UF6040 UF8040 UF8060 UF10060 UF10080 Diemension (D x L,mm) ф90x1175 ф160x1420 ф200x1475 ф200x1800 ф250x1715 ф250x2020 Recommended design flow (m3/H) 0.2~0.3 0.8~1.2 1.0~1.5 1.3~2.0 2.0~4.5 3.5~7.5 Membrane area(m2) 6 24 35 45 60 70 Diameter of hollow fiber(mm) OD/ID=1.66/1.0 or 2.4/1.2 Membrane Material Alloy-PVC / PAN / Reinforced PVDF / PVDF Nominal Poresize 0.01μm (0.001~0.1um are optional) MWCO(Dal) 100 K (5~500K are available) Filter Path Inside-out(PVC / PAN), Outside-in (PVDF) Configuration type Dead End / Cross flow Max. Feed pressure (Mpa) 0.3 Recommended TMP (Mpa) 0.02-0.08
NOTE: 1. Design flow selection is according to feed water quality and design condition, please contact us for more details
2.Normally, max design feed turbidity <50NTU